Place of Origin: | dongguan, China(mainland) |
Nazwa handlowa: | HRT |
Orzecznictwo: | ISO9001/ ISO14001/UL/RoHS/REACH |
Model Number: | A3800-T-A |
Minimum Order Quantity: | 75K PCS |
---|---|
Cena: | Negotiated |
Packaging Details: | paper tray with out carton |
Delivery Time: | 5 to 8 working days after payment checked |
Payment Terms: | TT, Western Union, PayPal, L/C |
Supply Ability: | 100 million pcs per month |
Pitch: | 1.27mm | wire range: | AWG#18 - #22 |
---|---|---|---|
Material: | Phosphor Bronzne | Finish: | Gold-plated |
Connector Type: | wire connnector Terminal | Insulation O.D: | 2.10mm(Max) |
High Light: | Crimp Terminal Connector,Crimp Wire Connectors |
Signal Wire To PCB Connectors 1.27mm Ptich Gold - Plated A3800-T-A
1, The specification of the product including basic size information, electrical and mechanical properties.
Basic size information | |||
Termination Interface Style | crimp or compression | ||
Processing methods | E-stamping before gold-plated | ||
Insulation O.D. | 2.10mm(Max) | ||
Part No. | A3800-GPE-A | ||
Application | signal | ||
Electrical properties | |||
Current Rating | 1.5A AC, DC | ||
Voltage Rating | 15V AC, DC | ||
Contact Resistance | 20mΩ Max | ||
Insulation Resistance | 1000mΩ min | ||
Withstanding Voltage | 500V AC/minute | ||
Mechanical properties | |||
Temperature range | -25℃ to 85 ℃ | ||
Other information please kindly check the following picture. |
2, Related drawing and report
The following pictures are engineering drawing and testing report for your reference, wish these can help you to purchase the ideal and right parts from us. Thank you!
5. Mechanical Performance
Test Description | Procedure | Requirement | ||
5-1 | Actuator Insertion & Withdrawal Force | Insert and withdraw actuator at the speed rate of 25±3mm / minute. | Refer to paragraph 7 | |
5-2 | Crimping Pull Out Force | Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) | AWG#18 | 6.0 kgf (Min.) |
AWG#20 | 5.0 kgf (Min.) | |||
AWG#22 | 4.0 kgf (Min.) | |||
5-3 | Terminal Insertion Force. | Insert the crimped terminal into the housing. | 0.80 kgf (Max.) | |
5-4 | Terminal/Housing Retention Force. | Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing. | 3.00 kgf (Min.) | |
5-5 | Durability | When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. | Contact Resistance 40mΩ (Max.) | |
5-6 | Vibration |
Amplitude: 1.5mm P-P Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes. (Based upon MIL-STD-202 Method 201A) |
Appearance No Damage. Contact Resistance 40mΩ (Max.) Discontinuity 1 μsec.(Max.) |
|
5-7 | Physical Shock |
490m/s²{50G},3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A) |
6. Environmental Performance And Others
Test Description | Procedure | Requirement | |
6-1 | Temperature Rise | Carrying rated current load.(Based upon UL 498) | 30℃(Max.) |
6-2 | Heat Resistance | 85±2℃,96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A) |
Appearance No Damage. Contact Resistance 40mΩ (Max.) |
6-3 | Cold Resistance | -25±3℃,96 hours (Based upon JIS C0020) | |
6-4 | Humidity |
Temperature: 40±2℃ Relative Humidity : 90~95% Duration: 96 hours (Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B) |
Appearance No Damage. Contact Resistance 40mΩ (Max.) Insulation Resistance 100MΩ (Min.) Dielectric Withstanding Voltage Must meet 4-3 |
6-5 | Temperature Cycling |
5 cycles of: a) -55℃ 30 minutes b) +85℃ 30 minutes (Based upon JIS C0025) |
Appearance No Damage. Contact Resistance 40mΩ (Max.) |
6-6 | Salt Spray | Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101D Cond. B) | |
6-7 | Solder-ability |
Soldering Time: 5±0.5 sec. Solder Temperature: 245±5℃ |
Solder Wetting 95% of immersed area must show no voids, pin holes |
6-8 | Resistance to Soldering Heat |
Solder pot method Soldering time: 10±0.5 sec. Solder Temperature: 260±5℃ Solder iron method Soldering Time: 5±0.5 sec. Solder Temperature: 370℃ ~ 400℃ |
Appearance No Damage. |
3, FAQ
Q:Do you allow multiple design per setup?
A:Yes.We accept OEM/ODM service and allow multiple design per setup.
Q:How long does shipping take?
A:It depends on the destination location and quantity. In most developed country, delivery by Fed x/UPS/DHL is normally 2-3 days(excluding weekends).
Q: How is the goods packaged ?
A: Usually in PE bads, tube, pipe and with outside carton box.
4, we can offer multiple, safe and fast shippment for you!
We have very good cooperation with world famouse delivery company, and the can offer us good service and favorable price. It's sure that every business between us will be fast and happy. Choose us! Let's connect the realistic and electronic world.
1.5mm Pitch Battery Connectors with Tin-plated terminals 6 Poles Crimp Wire to Board Connector
Pitch 2.00mm Phosphor Brone / Tin-plated battery terminal connector
1.50mm Pitch Single Row 6 Pin Crimp Connector Battery Connectors for AWG24# To 30# wire harnesses
2.54mm Pitch Battery Connecor with Lock Bump Double Row Male Header Crimp Connectors
2.50mm Pitch Plug housing(for socket contact), SMR Connector Wire to Wire Connectors
2,00 mm Pitch Wire To Wire Connector Zagniatana obudowa gniazda dla Molex 51005/51006
Dual Row Wire To Wire Connectors Low-Halogen Molex 43025 Micro-Fit 3.0 Receptacle Housing
4.2mm Pitch Mini-Fit Plug Housing, Dual Row Wire to Wire Connector with Panel Mounting Ears
single row housing wire to board connector 1.00mm pitch 04 to 10 Pin with lock for Laptop
wire to board connector with B type lock 1.0mm pitch wire housing white color connector
Złącza 2-stykowe do 16-stykowych z przewodem do płytki Rozstaw 2,50 mm Jeden rząd z obudową zamka
Dual Row 1.00mm Pitch Wire To Board Connectors A1003H Wire Housing With Lock