Dom
Produkty
O nas
Wycieczka po fabryce
Kontrola jakości
Skontaktuj się z nami
Poprosić o wycenę
Dom ProduktyWire to Board Connectors

wire housing with lock 2.0mm pitch wire to board connector max. 16pin crimp connector

wire housing with lock 2.0mm pitch wire to board connector max. 16pin crimp connector

    • wire housing with lock 2.0mm pitch wire to board connector max. 16pin crimp connector
    • wire housing with lock 2.0mm pitch wire to board connector max. 16pin crimp connector
    • wire housing with lock 2.0mm pitch wire to board connector max. 16pin crimp connector
  • wire housing with lock 2.0mm pitch wire to board connector max. 16pin crimp connector

    Szczegóły Produktu:

    Place of Origin: Dongguan, China(mainland)
    Nazwa handlowa: HRT
    Orzecznictwo: ISO9001/ ISO14001/UL/RoHS/REACH
    Model Number: A2006H-NP

    Zapłata:

    Minimum Order Quantity: 5000 pcs
    Cena: negotiated
    Packaging Details: Bag with outside carton
    Delivery Time: 5 to 8 working days after payment checked
    Payment Terms: TT, Western Union, PayPal, L/C
    Supply Ability: 500 K pcs per month
    Skontaktuj się teraz
    Szczegółowy opis produktu
    Color: white Pitch: 2.00mm
    Material: PA66 Wire range: AWG28# to 22#
    Flammability: UL94V-0 Row: single

     

    1, The specification of the product including basic size information, electrical and mechanical properties.

     

      Basic size information
    Suitable terminals A2211 series
    Suitable wafer A2006 series
    Mating lock to part with
    Wire Termination Method crimping
    Circuits 2 to 16 pins
    Wire Insulation Diameter  1.40mm Max.
    Mounting side Standard on-Board
    Terminals material phosphor bronze; tin-plated finish
     
                                                              Electrical properties
    Current Rating 3A AC, DC
    Voltage Rating 250V AC, DC
    Contact Resistance 30mΩ Max
    Insulation Resistance 1000mΩ min
    Withstanding Voltage 1000V AC/minute
     
                                                              Mechanical properties
    Operating Temperatureemperature range -25℃ to 85 ℃
                               Other information please kindly check the following picture.

     

    2, Related drawing and report

     

    wire housing with lock 2.0mm pitch wire to board connector max. 16pin crimp connector

    Mechanical Performance

     

    Test Description Procedure Requirement
    5-1 Actuator Insertion & Withdrawal Force Insert and withdraw connectors at the speed rate of 25±3mm / minute. Refer to paragraph 7
    5-2 Crimping Pull Out Force Fix the crimped terminal, apply axial pull out force on the wire at the speed rat of 25±3mm / minute.(Based upon JIS C5402 6.8) AWG#22 4.0kgf (Min)
    AWG#24 3.0kgf (Min)
    AWG#26 2.0kgf (Min)
    AWG#28 1.0kgf (Min)
    AWG#30 0.8kgf (Min)
    5-3 Terminal Insertion Force. Insert the crimped terminal into the housing. 1.50kgf (Max.)
    5-4 Terminal/Housing Retention Force. Apply axial pull out force at the speed rate of 25±3mm / minute on the terminal assembled in the housing. 1.50kgf (Min.)
    5-5 Pin Retention Force Apply axial push force at the speed rate of 25±3mm / minute 1.50kgf (Min.)
    5-6 Latch Yield Strength Mate connectors and pull apart until both latches break at the speed rate of 25±3mm / minute 2.00kgf (Min.)
    5-7 Durability When mated up to 50 cycles repeatedly by the rate of 10 cycle per minute. Contact Resistance 60mΩ (Max.)
    5-8 Vibration

    Amplitude: 1.5mm P-P

    Sweep time: 10-55-10 Hz in 1 minute Duration: 2 hours in each X.Y.Z. axes.

    (Based upon MIL-STD-202 Method 201A)

    Appearance No Damage.

    Contact Resistance 60mΩ (Max.)

    Discontinuity 1 μsec.(Max.)

    5-9 Physical Shock 490m/s²{50G},3 strokes in each X.Y.Z. axes. (Based upon JIS C0041/MIL-STD-202 Method 213B Cond. A)

    Environmental Performance And Others

     

    Test Description Procedure Requirement
    6-1 Temperature Rise Carrying rated current load.(Based upon UL 498) 30℃(Max.)
    6-2 Heat Resistance 85±2℃, 96 hours (Based upon JIS C0021/MIL-STD-202 Method 108A Cond. A)

    Appearance No Damage.

    Contact Resistance 60mΩ (Max.)

    6-3 Cold Resistance -25±3℃,96 hours (Based upon JIS C0020)
    6-4 Humidity

    Temperature: 40±2℃

    Relative Humidity : 90~95%

    Duration: 96 hours

    (Based upon JIS C0022/MIL-STD-202 Method 103B Cond. B)

    Appearance No Damage.

    Contact Resistance 60mΩ (Max.)

    Insulation Resistance 1000MΩ (Min.)

    Dielectric Withstanding Voltage Must meet 4-3

    6-5 Temperature Cycling

    5 cycles of:

    a) -55℃ 30 minutes

    b) +85℃ 30 minutes

    (Based upon JIS C0025)

    Appearance No Damage.

    Contact Resistance 60mΩ (Max.)

    6-6 Salt Spray Tin-plated 12 hours / Gold- plated 24 hours exposure to a salt spray from the 5±1% solution at 35±2℃. (Based upon JIS C0023/MIL-STD-202 Method 101D Cond. B)
    6-7 SO2 Gas

    24 hours exposure to 50±5ppm.

    SO2 gas at 40±2℃.

    6-8 NH3 Gas 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.

     

     

    3, we can offer various fast delivery way for you .

     

    wire housing with lock 2.0mm pitch wire to board connector max. 16pin crimp connector

    We have very good cooperation with world famouse delivery company, and the can offer us good service and favorable price. It's sure that every business between us will be fast and happy. Choose us! Let's connect the realistic and electronic world.

     

    Szczegóły kontaktu
    Dongguan Xinpei Plastic & Metal Electronic Co. Ltd

    Osoba kontaktowa: Barry Fu

    Tel: +8618126033127

    Wyślij zapytanie bezpośrednio do nas (0 / 3000)

    Inne produkty